P1 Planning Blog Post

My data source is the Motor Vehicle Collision - Crashes data source from data.gov. This tracks motor vehicle collisions in NYC

https://catalog.data.gov/dataset/motor-vehicle-collisions-crashes

I will show the different types of collisions, results, and causes in a chart that can meaningfully show and tell the user about the likely hood and incident types and results. I would like to provide my data as a pie charts with different types of wheels as individual sections, or perhaps as different size cars in a bar chart. I will have a time slider where you can move it and data will change as time increases.

Car accidents are no joke, and the outcomes are always never positive. My mood will be a gloomy one, with dark tones and colors, non-vibrant colors, and information and text that brings the user right to the point.



Comments

Post a Comment

Popular posts from this blog

Final Project: Reusing the Snake board design to create Tetris with the Arduino

Image
      This project is my final one, and I am super happy and sad to be at the end. I have learned so much in this course, and also had so much fun. There was a lot of creativity and design in making these projects, and I got to work hands on in NMID for the first time, which is something I will never say no to. This project layout will be the one I keep my Arduino as. The board setup works between my Snake and Tetris code, and is a great way to show what I learned in this class. The components for this one are the same as the Snake Arduino setup. The joystick is necessary for movement controls, like it was in Snake. Left and right move the pieces, down sends the pieces downwards, and up rotates the pieces so you can control their fit. The 8x8 LED array is meant to convey what the current game-board looks like, and when your current piece under control is moving. The last parts are the wire connectors, which connect the 5v, Ground, 8x8 LED array, and Joystick all to the Ar...
Read more

Art Meets Engineering: Using an Arduino compatible microphone to create light based on sound

Image
      This weeks project was based on using good engineering principals to create art. I tend not to be a very artistic person in general, but when I thought about art, I tend to think of movies, and moving colors, so I can up with the idea for colors to move based on the "strength" of your voice. While the piezo can detect stuff such as taps, I needed a microphone to detect actual sound input, so I had to order one off of Amazon. In the parts diagram below, swap out the piezo for the microphone, but everything else is exactly what I used. I connected all the regular LED's to digital pins 2-8 and 12, so that way I could just send a simple High/Low when I needed them on or off. I connected the RGB LED's pins to digital 9-11, so that way I could use the PWM technique to get analog results from a digital pin. I connected the final pin to ground. The microphone is connected to the 5V, ground, 0 digital pin, and the A0 analog pin to out put the digital and analog results. ...
Read more